Seat Golf Cabrio

Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet


Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet
Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet
Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet
Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet

Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet    Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet

Fk combined threaded + 4x bearing of leg (front + rear) golf 2/3 vw + convertible. This product page has been automatically translated.

If you have any questions, do not hesitate to contact us. Fk coilovers + 4 dome x bearing (front + rear) vw golf 2 3+ vw vento cabriolet. You are bidding on brand new and packaged products.

The ak street fk coilover version distinguishes by their very good handling and handling characteristics. The suspension system has thousands of fans and is in use around the world. The chassis consists of a complete set of 4 threaded spacers and springs tuned with spring blades. The price-performance ratio is excellent to this system of coilover!

The AK street coilovers quality: The coilovers are galvanized quality to protect against corrosion. The springs are made of high quality chrome silicon steel and then covered with high quality plastic. The suspensions are in continuously mounted height-adjustable condition, which means that you only need to relieve the wheel by means of the plug and set the desired height corresponding to about the wire. Because of the high quality workmanship and the use of quality materials, you will enjoy long-lasting driving pleasure with this chassis. Low installation cost: Installation time takes about 2-3 hours in a trade or rental shop. We then recommend performing a corresponding electronic wheel alignment.

We always recommend having them installed at a specialized workshop. Quality: fk is one of the oldest and well known suppliers for coilovers in Germany. Fk manufactures coilover systems such as top sports, silverline, sports king and silverline x finder, direct on the backnang site. The trolleys are already proven a hundred thousand times and used in the world. The price: the price is adjusted to an extremely attractive price-performance ratio.

The name of the a-street series of coilovers is a special chassis abbreviation for street sports and greatly appreciated by customers around the world. The adjustment range: you get the coilover a notice in which the audited adjustment measurements. In this section, you can adjust the vehicle and perform the technical examiner. Coilover systems are also suitable for winter operation, because in mountain landscapes or affected by areas of heavy snowfall, you can lower it back later in the winter!

In winter, so you can adjust your car, go further down in the spring, summer and fall. Further design details: - sporty-rigid tuning for more fun - stepless height adjustment in fit tested - yellow galvanized spacers with high corrosion resistance - good quality for long driving pleasure - beginners fk ak street suspension - including adjusting key - parts certificate included.

Fk ak coilover street + 4 camber plates for the front and rear axle, compatible with the following vehicles. Vw golf 3 1 h 1 (1hx0, 1 h); motorization: 40kw? 128kw; axle of max load front / rear: 980kg / 900kg vento vw type 1 h 2; motorization: 40kw? 128kw; axle of max load front / rear: 980kg / 900kg vw golf cabriolet type 1e7 (1ex0, 1e); motorization: 40kw? 128kw; max axle front / rear load: vw golf ii type 19e; motorization: 33kw? 118kw; axle of max load front / rear: 840kg / 740kg seat toledo typ 1l; motorization: 47kw? 110kw; Axle of max load front / rear: 865kg / 790kg. Important restriction: not suitable for variant models and syncro! Parts manufacturing steler: fk automotive material: tinned steel lower in mm: va + ha: 40mm-85mm. Delivery: coilover suspension, adjustment key, certificate, 4 camber plates front / rear. The screenshot article is an illustrative example. Certificate of conformity part according to § 19.3.

E-commerce as I want it. The item "fk combined threaded + 4x bearing of leg (front + rear) golf 2/3 vw + cabriolet" is on sale since Saturday, July 21, 2018. It is in the category "auto, motorcycle parts, accessories \ tuning, styling \ suspension \ threaded handsets ". The seller is "tuning-stuff" and is located in / in frankfurt.

This item can be shipped to the following country: europe.

  1. package: yes
  2. brand: fk automotive
  3. indication: bitte description of the note object
  4. Manufacturer Part Number: smvw8001
  5. authorization: incl. Homologation by §19.3
  6. manufacturer: automotive fk


Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet    Fk Combined Threaded + 4x Bearing Leg (front + Rear) Golf 2/3 Vw + Cabriolet